| Model |
MCO-230AIC |
| External Dimensions |
770 x 730 x 905 (mm) / 30.3 x 28.7 x 35.6 (inch) |
| Interior Dimensions |
643 x 523 x 700 (mm) /25.3 x 20.6 x 27.6 (inch) |
| Interior Volume |
230 liters (8.1 cu.Ft.) |
| Data Acquisition |
Automatic log function of temperature, CO2, Door opening/closing, Alarm and CSV file output |
| Exterior Cabinet and Door |
Galvanized steel with baked-on finish |
| Interior and Shelves |
Copper-enriched stainless steel |
| Outer Door |
Galvanized steel with baked-on finishReversible heated |
| Inner Door |
Tempered glass |
| Shelves |
Copper-enriched stainless steel 4 supplies as standard (Maximum 10), Exterior dimensions: 620 (W) x 450 (D) x 12 (H) mm, maximum load 7kg/shelf, Adjustable |
| Access Port |
Diameter 30mm port with non-VOC silicone stoppers (1 on back side) |
| Insulation |
Extruded polystyrene foam |
| Heating Method |
- |
| Air Flow |
Gentle vertical airflow, continuous with inner door closed |
| Air Filter |
0.3μm, Effeciency:99.97% or higher (for CO2) |
| UV Lamp |
- |
| Water Level Sensor |
- |
| Communication |
Remote alarm contacts standard. Optional 4-20mA connection. Optional with RS-232C/ RS-485/LAN data ports |
| CO2 Gas Connection |
4mm to 6mm inner diameter tubing |
| CO2 Gas Pressure |
0.03 MPa (G) (0.3Kgf/cm2G, 4.3psiG) from two stage CO2 regulator |
| Net Weight |
90kg (198 lbs) |
| Tempearture Control Range |
+5°C above ambient to 50 °C*1 (Ambient temperature: 5°C-35°C) |
| Tempearture Uniformity |
±0.25°C (23°C ambient, setting: 37°C, CO2: 5%, no load)*2 |
| CO2 Control Range and Deviation |
0% to 20%,±0.15% (23°C ambient, setting 37°C, 5% CO2, no load) |
| Interior Humidity |
95% ±5%R.H. at 37°C by natural evaporation with humidifying pan |
| Max. Power Consumption |
Max. 440W |
| Max. Heat Discharge |
1,250kJ/h |
| CO2 Sensor Platform |
Ceramic based, single beam infrared sensor, with dual wavelength measurement for continuous auto-zero calibration |
| CO2 Sampling Patent Pending |
No moving parts; airflow passess over in/out ports to sustain continuous sampling |
| Leveling Feet |
4 |
| CO2 Calibration |
- |
